GE VersaSafe VersaPoint IC220SDL840, Руководство пользователя, Страница: 38 / 122

3
3.5 Terminal point assignment
Figure 3-2 Assignment of plug-in connectors on the module
For the IB IL 24 SDOR 4-PAC, the VersaPoint and COMBICON connectors are supplied
with the module. They are keyed and labeled accordingly for connection to prevent polarity
reversal. If other connectors are used according to the ordering data, they must also be
keyed.
The following applies for the tables below:
– All relay outputs are safe digital relay outputs.
– All relay contacts are floating N/O contacts.
75561004
1 2
1.1
1.2
1.3
1.4
2.1
2.2
2.3
2.4
1
2
3
4
1
2
3
4
1
2
3
4
1.1
1.2
1.3
1.4
2.1
2.3
2.4
2.2
X1 X2
X3 X4
X1
1
2
1
2
3
4
1
2
3
4
D
1
2
0
IN1
1
2
1
2
3
4
1
2
3
4
FS
1
2
1
IN2
1 2
1.1
1.2
1.3
1.4
2.1
2.2
2.3
2.4
1
2
3
4
1
2
3
4
1
2
3
4
3.1
3.2
3.3
3.4
4.1
4.3
4.4
4.2
X2
5.1 5.2 5.3 5.4
X3
6.1 6.2 6.3 6.4
X4
Only use the connectors supplied with the module or connectors that are approved as
replacement items (see "Ordering data: Accessories" on page 11-9).
WARNING: Loss of electrical and functional safety if potential areas are not
observed
There is no safe isolation between the contacts of a COMBICON connector.
Only connect one voltage range to a COMBICON connector.
See also Figure 2-3 "Basic representation of the relay outputs".
WARNING: Loss of electrical and functional safety due to surge voltage
The module is not suitable for switching linked voltages.
Make sure that no linked voltages occur.
3-4 User manual IC220SDL840 -
May 2018
GFK-2734