•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
CAN ICES/NMB compliance
This product complies with the Canadian standard ICES-001/NMB-001 concerning
electromagnetic compatibility.
1.3.4
Other regulations and standards
Introduction
This section describes the standards that apply to the Monitor UVis-920 system.
Environmental conformity
This product conforms to the following environmental requirements.
Title
Requirement
Waste Electrical and Electronic Equipment (WEEE) Directive
2012/19/EU
Management Methods for the Restriction of the Use of Haz-
ardous Substances in Electrical and Electronic Products.
China RoHS
Standards, machinery and
electrical equipment
Standard requirements fulfilled by this product are summarized in the table below.
Description
Standard
Safety of machinery. General principles for design. Risk
assessment and risk reduction.
EN ISO 12100
Safety requirements for electrical equipment for mea-
surement, control, and laboratory use - Part 1: General
requirements.
EN 61010-1, IEC 61010-1,
UL 61010-1, CAN/CSA-
C22.2 No. 61010-1
Monitor UVis-920 Operating Instructions 29055049 AD
9
1 Introduction
1.3 Regulatory information
1.3.3 Regulations for USA and Canada
