manualshive.com logo in svg

GE T35, Инструкция по эксплуатации

Harman Kardon T35 - высококачественная аудиосистема с уникальным звучанием. Для получения подробной информации о настройке и использовании продукта, загрузите бесплатное Руководство пользователя с нашего веб-сайта. Владельческое руководство доступно для скачивания на manualshive.com. Наслаждайтесь музыкой в лучшем качестве!

Поделиться
Скачать
background image

5-56

T35 TRANSFORMER PROTECTION SYSTEM – INSTRUCTION MANUAL

PRODUCT SETUP

CHAPTER 5: SETTINGS

5

Overview

IEC 61850 is a series of international standards and technical reports applicable to power utility automation systems. It 
includes semantics, abstract communication services, specific communication services, performance specifications, 
network engineering guidelines, configuration description methodologies, and engineering processes. The standard 
enables interoperability among intelligent electronic devices (IEDs) from different suppliers and interoperability among 
software configuration tools from different suppliers. Interoperability in this case is the ability for IEDs to operate on the 
same network or communication path sharing information and commands, and for configuration tools to understand 
each other's configuration files.
The UR family supports a large subset of IEC 61850 features. These are detailed in the UR Family Communications Guide 
and include the information model, GOOSE publish, GOOSE subscribe, buffered report server, unbuffered report server, and 
Manufacturing Message Specification (MMS) query, read, write, and control services. In addition, the URs and their 
EnerVista UR Setup software support IEC 61850 Substation Configuration Language (SCL) file import/export and merging.
Whereas prior UR releases used edition 1.0 of IEC 61850, this release uses edition 2.0, with certain modifications according 
to IEC/TR 61850-90-5. Only edition 2.0 61850 configuration tools can interoperate with edition 2.0 devices, such as the UR 
7.3x release. This UR release uses edition 2.0 SCL, which differs from edition 1.0 SCL. GSSE, fixed GOOSE, and fixed report 
services of previous releases are no longer supported, and thus UR devices of previous releases using these features have 
to be converted to configurable GOOSE to communicate with a 7.3x or later device.
Many settings of UR protection, control, and monitoring elements, that is to say elements that are not concerned with the 
IEC 61850 protocol, can nevertheless be accessed via IEC 61850. These settings are documented elsewhere in this Settings 
chapter. This section of the Settings chapter deals solely with the settings that configure the IEC 61850 protocol itself.
The maximum number of simultaneous clients supported by the UR family is five.

EnerVista setup for IEC 61850

The EnerVista UR Setup software provides the interface to configure T35 settings for the IEC 61850 protocol. This section 
describes this interface. The software also supports import/export and merging of IEC 61850 Substation Configuration 
Language (SCL) files as documented in the UR Family Communications Guide.
The IEC 61850 protocol configuration settings cannot be accessed through the UR front panel and are instead accessible 
with the EnerVista software, via MMS query, read, and write services, or via 61850 SCL file transfer. Accordingly, whereas 
other settings are presented in this manual as they appear on the front panel, IEC 61850 settings are presented as they 
appear in the software. See the UR Family Communications Guide for MMS and SCL access. Note that if you update the IEC 
61850 settings in the EnerVista software by writing to them by MMS while the corresponding IEC 61850 panel is open in 
EnerVista, you need to close then open the panel in EnerVista for the correct readings to display.
IEC 61850 protocol configuration settings are accessed through software panels that are selected either in the 

Online 

Window

 area (see figure) or the 

Offline Window

 area in the EnerVista software.

The EnerVista software also includes an interface that is compatible with firmware versions 5.0 to 7.2 to configure 
subscribers. Use the Simplified GOOSE Configurator in the Offline Window area.

Содержание T35



































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для T35

PIETRO FIORENTINI DELTAFLUX MT100 Technical Manual preview
DELTAFLUX MT100
Бренд: PIETRO FIORENTINI Страницы: 16
KELCO F60 Installation Instructions Manual preview
F60
Бренд: KELCO Страницы: 36
Vacon NX series Maintenance Manual preview
NX series
Бренд: Vacon Страницы: 64
ZKTeco F6 Installation Manual preview
F6
Бренд: ZKTeco Страницы: 2
FASAR ELETTRONICA FE230 Quick Start Manual preview
FE230
Бренд: FASAR ELETTRONICA Страницы: 2
Faro Barcelona 33929 Installation Manual preview
33929
Бренд: Faro Barcelona Страницы: 8
Faro 33928 Installation Manual preview
33928
Бренд: Faro Страницы: 3
YASKAWA G7 Series Technical Manual preview
G7 Series
Бренд: YASKAWA Страницы: 456
Saga SAGA1-L40 User Manual preview
SAGA1-L40
Бренд: Saga Страницы: 9
IFM Electronic ecomat 100 R 360 Operating Instructions Manual preview
ecomat 100 R 360
Бренд: IFM Electronic Страницы: 16
IFM Electronic Ecomot300 AC2630 Operating Instructions Manual preview
Ecomot300 AC2630
Бренд: IFM Electronic Страницы: 11
IFM Electronic AC1331 Installation Instructions Manual preview
AC1331
Бренд: IFM Electronic Страницы: 23
Lamtec BT300 BurnerTronic Quick Reference preview
BT300 BurnerTronic
Бренд: Lamtec Страницы: 48
Sanhua DPF Series Instructions preview
DPF Series
Бренд: Sanhua Страницы: 3
QED MP50 Instruction Manual preview
MP50
Бренд: QED Страницы: 26
YOKOGAWA UTAdvanced UT35A Technical Information preview
UTAdvanced UT35A
Бренд: YOKOGAWA Страницы: 18
National Instruments SCC-DO01 User Manual preview
SCC-DO01
Бренд: National Instruments Страницы: 14
CORNING Ascent 6970 Instruction Manual preview
Ascent 6970
Бренд: CORNING Страницы: 142

Бренды по названию

Популярные бренды

Загрузить еще бренды