How to Use the Minute/Second
The MIN/SEC TIMER has three
timing functions:
. It operates as a minute timer.
●
It can be set to delay cooking.
●
It can be used as a
setting
after defrosting.
The MIN/SEC TIMER operates
without microwave energy.
How to Time a 3-Minute
Phone Call
1. Touch MIN/SEC TIMER
pad. The display shows “: O“ and
“ENTER TIME” flashes.
2. Touch number pads 3,0 and O (for
3 minutes and no seconds). Display
shows
and “TIME” flashes.
3. Touch START. Display shows
“TIME” and time counting down.
4. When time is up, oven signals,
flashes
and display shows
time of day.
Programming a HOLD
TIME
The Minute/Second Timer can also
be used to program “hold time”
between microwave cooking
functions. The time can range from
one second to 99 minutes and 99
seconds. A HOLD, or “standing”
time may be found in some of your
own recipes or cooking guide.
Programming Delayed
Cooking
To delay cooking
up
to 99 minutes,
touch TIME COOK I &II
enter
cooking time. Touch MIN/SEC
TIMER and enter number of
minutes to delay cooking. Touch
START. Timer will count down to
zero and cooking will begin.
How
to Defrost, Hold and
Time Cook
Let’s say you want to defrost a frozen
casserole for 15 minutes, hold for
10
and then Time Cook for
25 minutes. Here’s how to do it:
Step 1: Take casserole from freezer
and place in oven.
The display shows “: O“ and
“POWER
“ENTER
TIME” flashes.
Step 3: Touch pads 1,5,0 and O for
15 minutes defrosting time.
appears on display. (Defrosting is
automatically set on power level 3
but can be changed by touching the
POWER LEVEL pad and the
desired power level.)
Step 4: Set standing or hold time
by touching MIN/SEC TIMER.
The display shows “: O“ and
“ENTER TIME” flashes.
Step 5: Touch 1,0,0 and O to hold
for ten minutes.
appears
on display and “TIME” flashes.
Step 6: Touch TIME COOK I & II
pad. The display shows “:
O“
and
“POWER
“ENTER COOK
TIME” flashes.
Step 7: Touch 2,5,0 and O for
twenty-five minutes of cooking time.
“COOK TIME” flashes and
and “POWER 10” appear on display.
Touch
and “15
counting down show
on display. As each function is
automatically performed oven
display shows instructions entered
and the function.
Step 9: When time is up, the oven
signals and flashes
Questions and Answers
Q. What will happen if I
accidentally reverse my defrost,
hold and cook instructions?
A. The oven will automatically
rearrange your program. Defrosting
will always come first, then hold,
and then the cooking function.
Q. Can I defrost and hold only?
A. Yes. Sometimes you may only
want to defrost a food, hold it, and
cook it later. All you need to do is
program in Defrost and amount of
time. Then program Hold and the
amount of time. Be sure to put the
thawed dish in the refrigerator
promptly.
Let foods remain at room
temperature only as long as safe.
Times will vary.
Q. I programmed my oven for a
specific defrosting time but it
defrosted longer than necessary.
What happened?
A. When instructions conflict,
the oven carries
the last
instruction. You may have set the
oven to Defrost for 4 minutes,
Hold/Time for 2 minutes, and then
Defrost for 6 minutes. In this
case,
the
oven
Defrost for 6 minutes
and Hold/Time for 2 minutes.
9
Содержание Spacemaker II JEM20H
Страница 30: ...30 ...
Страница 31: ...Noks 31 ...
