15
10
5
0
5
10
10
5
0
5
10
Hot or cold air directed
onto sensor
Pets
Intermittent
heat sources
Windows
Figure 3.
Cross traffic
Figure 4.
Blocking coverage pattern
6150-ID SHARPSHOOTER
™
PIR
installation instructions
Sunlight or
reflected sunlight
Description
The 6150-ID (Figure 1) is an addressable PIR device that
interfaces with the PinPoint system. This system provides
flexible and reliable two-way communication between the
device and the controller.
Mounting location
Avoid false alarm sources (Figure 2)
The unit should not “see” sources of heat or cold. For
false alarm free operation, no part of an unwanted hot
spot should enter any part of a zone.
Locate for cross traffic (Figure 3)
Place the unit where intruders move across the beams,
not toward the unit. For best detection, an intruder
should cross the entire zone.
Do not block the coverage pattern (Figure 4)
The unit requires a clear line of sight. Inform end-users
not to block the coverage pattern with inventory or
furniture.
Figure 1. Exploded view
g
Figure 2.
False alarm sources
Sliding LED cover
Standard lens
(Masking kit included)
Swivel mounting bracket
#8 x 3/4"(2cm) screw
for ball joint shoe
Front cover
Two #6 x 3/4"(2cm) screws for
mounting the bracket or case
(Two #6 wall anchors are
included for sheet rock mounting)
Mounting knockouts
Lens shield/circuit
board assembly
Base
LED
