5.1
Assemble transfer stack
Introduction
A single or multiple gels can be transferred at the same time. Place multiple small gels
of the same thickness side by side, or stack two gels vertically in a carefully constructed
multi-layered stack. Refer to
Section 8.1 Specifications, on page 62
for the minimum and
maximum stack thickness of SEMIPHOR TRANSPHOR UNIT series.
This section describes how to assemble the transfer stack.
Illustration of a transfer stack
with a single gel
1
2
3
4
5
Function
Part
Blotting paper (2 to 3 sheets)
1
Gel
2
Membrane
3
Blotting paper (2 to 3 sheets)
4
SEMIPHOR TRANSPHOR UNIT series Operating Instructions 29281777 AA
37
5 Operation
5.1 Assemble transfer stack
