GE RPV311, Техническое руководство

Страница: 198 / 295

RPV311 Chapter 13
– RPV Manager
RPV311-TM-EN-7 198
Figure 95: Polling configuration
Polling Configuration fields description:
COMTRADE Directory: directory path where the new records are downloaded and
where the fault locator calculation searches.
Display Downloaded COMTRADES Limit: maximum COMTRADE records already
downloaded that will be displayed on the screen
Display Available COMTRADE Age (day): limit, in days, of downloaded records that
will be fetched and displayed on the screen.
COMTRADE DAT File: format in which the COMTRADE file will be saved.
Start Auto Polling on Init: starts Auto Polling automatically by the application.
Automatic Fault Location: performs the fault location calculation after the
COMTRADE file refresh.
Auto Refresh Interval (min): interval, in minutes, that anautomatic update of the
data of the device will run when the Auto Polling is active.
Auto COMTRADE Polling Interval (min): interval, in minutes, that will be held the
automatic download of COMTRADE files.
Auto Polling COMTRADE Age (day): maximum age, in days, of records that will be
downloaded automatically in Auto Polling. For example, if a register was made 5
days ago and the RPV Manager is started today and the Auto Polling COMTRADE Age
(day) is set to 4 (or 1, 2 or 3) the register will not be downloaded during the auto
polling.
Equipment Request Limit: limit of records that will be requested from the equipment
in each query.
Retrieve Fault: When selected, automatically downloads the short duration records,
both triggered and continuous.
Retrieve Disturbance: When selected, performs the automatic download of the
slower disturbance records, both triggered and continuous.
Retrieve Travelling Wave (TW): When selected, performs the automatic download of
the travelling wave records.
Retrieve Steady State (SS): When selected, performs the automatic download of the