GE RPV311, Техническое руководство

Страница: 183 / 295

RPV311 Chapter 12
– RPV Tools
RPV311-TM-EN-7 183
Figure 82: Screen to configuration on the SCL file
The < O
K
> button is to confirm the changes in the files list. The < C
ANCEL
> button is to
cancel the changes. The < A
DD
F
ILES
> and < R
EMOVE
F
ILES
> buttons are used to add or
remove a file of the list of IED configurations, loaded onto the initial screen.
When a file is removed, it is necessary to know that the configuration files are not
modified. It is not possible to view the GOOSE
C
ONTROL
B
LOCK
, associated with an input
if the file is removed, however the configuration of the digital input of the RPV
remains active.

Association between GOOSE messages RPV digital inputs
To associate a GOOSE Control Block to a digital input, do the following:
Initially select an element GOOSE binary of the GOOSE Control Block list, obtained of
the SCL files generated by IED;
Select one of the 320 RPV digital inputs according to GOOSE;
Click on the button to make association between the GOOSE message and the
previously selected RPV digital input;
The message indicating the operation will show in the status area;
To remove the association click on the disassociation button.;
The user can only associate a GOOSE
C
ONTROL
B
LOCK
with a digital input if the data is
compatible with the permitted limits on GOOSE. An example of a combination of
GOOSE
C
ONTROL
B
LOCK
with a digital input.
It is possible to associate a GOOSE
C
ONTROL
B
LOCK
with a digital input only if the data
is compatible with the permitted GOOSE message data. An example of association of
a GOOSE
C
ONTROL
B
LOCK
with a digital input is shown in Figure 83 .