GE Revolution CT, Руководство пользователя

Страница: 527 / 702

5. In the
Services
area, select your options.
6. Click [Save] to save the settings for the currently selected node.
7. Click [OK].
4.2.2 Remove Nodes from the Configuration Host List
1. From the
Configured Hosts
list, select the node you want to remove.
2. Click [Remove].
3. Click [Yes] at the confirmation prompt.
4.2.3 Ping a Remote Host
1. From the
Configured Hosts
list, select the node you want to ping.
2. Click [Ping].
3. Click [OK] to the message prompt.
If a failure occurs, read the prompt to help determine the cause of the failure.
4.3 Local DB Retrieve Exams, Series, or Images
Use these steps to restore exams, series, or images to your system from a remote host.
1. On the right monitor, open the File Manager.
2. From the [Source] menu, select the remote host from which you want to retrieve images.
○
If the host is not available, a message appears. Click [OK].
○ The host must be configured to receive a query. Check the SCP Settings on the
Configure Network Hosts window to verify that all the SCP settings have been checked
(Allow to query, Allow to retrieve, Allow to send). You may need to add the CT system to
the remote service as a network destination.
3. To find the exam you want to restore:
a. In File Manager, enter a search string into the
Search
box.
The filtered Exam List displays.
b. To return to the non-filtered Exam List, click the close icon in the Search box.
4. From the Exam List, select the exam you want to retrieve.
If you are selecting series or images, select them from the Series List.
NOTE:
You can select more than one exam, series, or image. Shift-click to select a
contiguous list, or Control-click to select items one-by-one.
You cannot retrieve series or images from different exams in the same transfer. Select the
series or images you want to retrieve from an exam, start the retrieval, and then transfer the
series or images from the other exam.
5. To retrieve exams, right click the exam, then click
Retrieve Exam
.
To retrieve series, right click the series, then click
Retrieve Series
.
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
Chapter 17 Data Management 527