manualshive.com logo in svg

GE Revolution CT, Руководство пользователя

Поделиться
Скачать
GE Revolution CT Скачать руководство пользователя страница 388

3.2.2   Applying filters

1. From the viewport control panel, click the arrow next to 

Image Display

, then the [Filters] icon

.

2. Select a filter type.

○

Click [E1], [E2] or [E3] for edge enhancement.

○

Click [LU] for lung enhancement.

○

Click [S1], [S2] or [S3] for smoothing.

3. To turn off the filters, click [None] for the filter type.

Alternatively, click the [Display Normal] icon 

 from the 

Image Display

 set of tools.

3.3   Gray Scale Enhancement

Gray Scale Enhancement (GSE) changes the slope and gamma curve of an image. It can be

used in head studies to improve the bone/brain interface, which helps with gray/white matter

differentiation. There are three levels of GSE: G1, G2, and G3. G1 applies the least amount of

enhancement and G3 applies the most. The GSE filter selected is applied to all images in the

series. When you apply this filter, the image is annotated with G1, G2, or G3 just above the

vertical tick mark scale on the right side of the image.

Revolution CT User Manual

Direction 5480385-1EN, Revision 1

388

3  Image Tools

Содержание Revolution CT































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды