GE Revolution CT, Руководство пользователя, Страница: 290 / 702

Enhance is available in the
Primary Recon
and
Secondary Recon
parameter collections, if the
slice thickness is 0.625 mm or 1.25 mm. The interval for these slice thicknesses must be equal
to the slice thickness (0.625 or 1.25) or one half the slice thickness (0.312 or 0.625).
Illustration 23: Image Enhance images
An "
E
" displays on the image next to the annotation for to indicate IQ Enhance is enabled for the
acquisition.
NOTE:
IQ Enhance is not compatible with Axial, Cine or Cardiac scan types.
6.1.7 Quality Check (QC) Images
QC images are non-diagnostic, preview images generated by the system to check if the scan
acquisition was successful, prior to full IQ images. QC images are displayed in the two
viewports on the scan monitor. QC images have an annotation at the bottom to indicate that
they are not for diagnostic use. QC images are only generated once during a scan series, and
are not saved or available after the scan series is acquired.
QC Images will be auto-generated with the Primary Recon for the following scan types: Axial ,
Cardiac Axial, Helical and Cine.
6.1.8 Flip / Rotate
The reconstructed orientation of an image can be changed from the default mode by selecting
one of the following flip/rotate options in the
Primary Recon
and
Secondary Recon
collections.
•
None
•
FLR (Flip Left Right)
•
FTB (Flip Top Bottom)
• FLR / FTB (Flip Left Right / Flip Top Bottom)
NOTE: Flip / Rotate options cannot be selected for images being acquired in the decubitus
patient positions.
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
290 6 Recon Parameters