For answers to your Monogram,
®
GE Profile
™
or
GE
®
appliance questions, visit our website at
ge.com or call GE Answer Center
®
service,
800.626.2000.
Advantium wall oven/GE Profile cooking tower dimensions and cabinet installation information (in inches)
Note:
Cabinets
installed adjacent
to wall ovens must
have an adhesion
spec of at least a
194°F temperature
rating.
Note:
2" minimum
between cutouts
when installed
above warming
drawer or single
wall oven.
Installation
Information:
Before installing,
consult installation
instructions packed
with product for current
dimensional data.
Specification Revised 9/05
240401
R
Listed by
Underwriters
Laboratories
Advantium_Install_dim.eps
Cutout width
X
Cabinet width
Required
cutout location
36-3/4"
minimum
from floor
Junction
box
location
A=Allow 1" overlap of oven over top and bottom edges of cutout.
B=Allow 11/16"-3/4" for overlap of oven over side edges of cutout.
4-3/16
Y
Cutout height
A
B
Z
Cutout depth
W
H
Advantium Wall Oven Dimensions (in inches)and
Cabinet Installation (in inches)
Note:
Cabinets installed adjacent
to wall ovens must have an adhesion
spec of at least 194
°
F temperature rating.
Construct Solid
Bottom Min.
3/8" Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides.
(Must Support
150 lbs.)
Conduit
(48-1/2"
long)
D
1" Min. above toekick or adjust
to oven installation height
2" MIN between cutouts
2-1/2" MIN between cutouts
recommended—2" MIN required
9-1/4" cutout height
28-1/2" cutout width
Junction box location
A
B
A
B
Construct Solid Bottom
MIN 3/8" Plywood Supported by
2 x 4 or 1 x 2 Runners, all Four Sides.
(Must Support 150 lbs. for Advantium)
(Must Support 200 lbs. for Wall Oven)
4-3/16
D
Excluding
Handle
H
W
adv_240_120_cooktower_dia.eps
Conduit
(46" long)
Cabinet width
CL
(Must Support 275 LBS.)
cooking_tower_solid_floor.eps
2 x 4's or
equivalent
solid floor
Suitable
bracing
to support
runners
21-5/8"
over centerline
of cabinet
A=Allow 1” overlap of oven over top and bottom edges of cutout.
B=Allow 11/16”-3/4” for overlap of oven over side edges of cutout.
A=Allow 1” overlap of oven over top and bottom edges of cutout.
B=Allow 11/16”-3/4” for overlap of oven over side edges of cutout.
Cabinet
Width
W
Width
H
Height
D
Depth
(excluding
handle)
X
Cutout
Width
Y
Cutout
Height
Z
Cutout
Depth
(minimum)
SCB1000/1:27" Installation
without trim kit
27
26-3/4
19-1/32
21-1/2
25-1/4
17-1/2
23-1/2
SCB1000/1:30" Installation
with trim kit
30
29-3/4
19-1/32
21-1/2
25-1/4
17-1/2
23-1/2
SCB1000KWW/CC/BB
GE Profile Advantium
®
Wall Oven
