GE Portrait Hub01, Руководство пользователя

Страница: 81 / 198

9
Hub and modes
About modes
You can select one of the two use modes on the Hub, REMOTE or LOCAL :
●
The REMOTE mode displays alarms on the Central Viewer only. They are indicated
on the Hub (visually and audibly) only after you manually activate the screen by
pressing the asterisk key and entering the passcode. The only exception is a case
where the Hub is disconnected from the network and a new alarm is triggered: as
the alarm cannot be communicated to the Central Viewer, the Hub will indicate it
locally. In this mode, the Hub cannot be used as a primary alarming or viewing
device.
●
The LOCAL mode displays alarms on both the Central Viewer and Hub. In this mode
the Hub screen activates automatically whenever there are alarms. Measurement
data is available also when the Hub is locked. However, you need to unlock the
Hub to acknowledge alarms.
The mode indicator (highlighted here with red) in the left corner of the main header
area shows which mode is in use:
REMOTE
LOCAL
Selecting the use mode
You can select the use mode from the Hub menu. You can access the menu from
any view.
1. Press .
2. Select REMOTE or LOCAL .
3. Confirm the selection.
The corresponding use mode indicator appears in the main header area:
●
= REMOTE
●
= LOCAL
4. You can return to the previous view by swiping down on screen or by pressing
.
5815148-01
Portrait ™ Mobile Monitoring Solution
81