GE Portrait Hub01, Руководство пользователя

Страница: 67 / 198

Managing patients and monitoring
●
Patient is not available appears: another Hub has already been assigned to this
patient, or the patient has been discharged remotely. Check the patient and Hub
assignments and patient admission status on the Central Viewer.
●
No wireless network appears: there is no wireless network connection. Make sure
that the Hub is within the network coverage range. If that does not help, contact
service personnel.
●
No connection to patient monitoring services appears: the Hub is not connected
to the Core Services. Make sure that the Hub is within the network coverage range.
If that does not help, contact service personnel.
●
No license available appears: there are no available monitoring licenses. Unassign
one Hub or wait until a license becomes available again.
Attaching measurement devices to the patient
1. Attach the Wearable SpO
2
Parameter and/or the Wearable RR Parameter to the
patient:
For more detailed information on each measurement, refer to the parameter-specific
instructions.
Pairing the first sensor
You need to create a wireless connection between the Hub and sensor to start
monitoring a patient. This is done by pairing them.
To pair the sensor, follow the animation on the Hub screen.
5815148-01
Portrait ™ Mobile Monitoring Solution
67