GE Portrait Hub01, Руководство пользователя

Страница: 152 / 198

Alarm specifications
●
Time ≥ 5 s: ±1 s
●
Frequencies: ±5 Hz
IEC alarm tone sound patterns
Priority Corresponding sound pattern
High
●
Beep “C” (523 Hz/100 ms) Silence (100 ms)
●
Beep “F” (698 Hz/100 ms) Silence (100 ms)
●
Beep “G” (784 Hz/100 ms) Silence (300 ms)
●
Beep “A” (880 Hz/100 ms) Silence (100 ms)
●
Beep “B” (988 Hz/100 ms) Silence (1 s)
●
Beep “C” (523 Hz/100 ms) Silence (100 ms)
●
Beep “F” (698 Hz/100 ms) Silence (100 ms)
●
Beep “G” (784 Hz/100 ms) Silence (300 ms)
●
Beep “A” (880 Hz/100 ms) Silence (100 ms)
●
Beep “B” (988 Hz/100 ms) Silence (5 s)
Medium
●
Beep “C” (523 Hz/200 ms (Silence (200 ms)
●
Beep “G” (784 Hz/200 ms) Silence (200 ms)
●
Beep “B” (988 Hz/200 ms) Silence (19 s)
Low
Beep “C” (523 Hz/200 ms) Silence (25 s)
Auditory information signal characteristics
Measurement and start-up related information signals
Signal Frequency (Hz) Duration (ms)
Start-up sound
523 200
Power failure (alarming unit)
2700 ±300 500
Communication failure (alarming unit)
2700 ±300 200
Alarm delay specifications
The disclosed alarm system delays are measured by simulator or respective methods,
which represent optimal signals. Possible interferences and poor quality signals in a
clinical environment may extend the disclosed alarm system delays.
The alarm generation consists of two components: the delay to detect the alarm
condition by the algorithm and the constant signal generation delay. Both of these
components are included in each alarm system delay. For some alarms, the signal
generation delay is configurable. The measurements are done using the default adult
alarm delay.
The Hub sends the alarm to the network simultaneously as it generates the local
alarm signals. The additional delay from the alarm signal generation on the Hub to
the alarm signal generation at the Central Viewer is typically <2 s. If the connection is
152
Portrait ™ Mobile Monitoring Solution
5815148-01