GE PACSystems RX3i Genius, Руководство пользователя

Страница: 41 / 79

Chapter 5 . Diagnostics
Diagnostics Chapter 5
This chapter describes:
•
Status Bits
o
Genius Status Bits for Genius Gateway
o
PROFINET Status Bits for Genius Gateway
• Module LED Indicators
•
Power-up
o
Module Restart
o
Problems During Power-up and Reset
o
Transitioning from Firmware Update Mode to Normal Operating Mode
5.1 Status Data
The GGC001 produces a total of 64 bits (8 bytes) to supply status information to the controlling
PROFINET Controller. When ultimately controlled by an RX3i PLC, these reference bits consume
a total of 64 reference address bits in %I memory. The 64 bits consist of
•
32 bits related to the operation of the GCG001 itself referred to in PME as “Gateway
Status Data” and
• 32 bits related to the operation of the Genius bus which it controls – referred to as
“Genius Status Data” in PME.
Each bank of 32 bits may be assigned a different set of Input reference addresses in RX3i
memory.
For each bank of 32 status bits, a default beginning reference (the next available %I) for the
status bits is automatically assigned by Proficy Machine Edition (PME). These assignments may
be changed by clicking on the GCG001 and keying in different %I references.
5.1.1 PROFINET Status Data
For the Genius Gateway GCG001, the thirty-two bits in the PROFINET Status Data are
organized as follows, beginning at the first %I status reference assigned to this bank of 32:
Figure 21: Gateway Status Data
GFK-2892B PACSystems RX3i Genius Communications Gateway User Manual Public 37