manualshive.com logo in svg

GE P4A, Техническое руководство, Страница: 44 / 850

Поделиться
Скачать
GE P4A Скачать руководство пользователя страница 44

4

INSTALLATION, COMMISSIONING AND SERVICING

4.1

LIFTING HAZARDS

Many injuries are caused by:

●

Lifting heavy objects

●

Lifting things incorrectly

●

Pushing or pulling heavy objects

●

Using the same muscles repetitively

Plan carefully, identify any possible hazards and determine how best to move the product. Look at other ways of
moving the load to avoid manual handling. Use the correct lifting techniques and Personal Protective Equipment
(PPE) to reduce the risk of injury.

4.2

ELECTRICAL HAZARDS

Caution:
All personnel involved in installing, commissioning, or servicing this equipment must be
familiar with the correct working procedures.

Caution:
Consult the equipment documentation before installing, commissioning, or servicing
the equipment.

Caution:
Always use the equipment as specified. Failure to do so will jeopardise the protection
provided by the equipment.

Warning:
Removal of equipment panels or covers may expose hazardous live parts. Do not touch
until the electrical power is removed. Take care when there is unlocked access to the
rear of the equipment.

Warning:
Isolate the equipment before working on the terminal strips.

Warning:
Use a suitable protective barrier for areas with restricted space, where there is a risk of
electric shock due to exposed terminals.

Caution:
Disconnect power before disassembling. Disassembly of the equipment may expose
sensitive electronic circuitry. Take suitable precautions against electrostatic voltage
discharge (ESD) to avoid damage to the equipment.

Chapter 2 - Safety Information

P54A/B/C/E

18

P54xMED-TM-EN-1

Содержание P4A



















































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов