manualshive.com logo in svg

GE P4A, Техническое руководство, Страница: 347 / 850

Поделиться
Скачать
GE P4A Скачать руководство пользователя страница 347

Ch 1

Ch2

1550 nm single-mode

Not fitted

1550 nm single-mode

1550 nm single-mode

850 nm

1300 nm multi-mode

850 nm

1300 nm single-mode

850 nm

1550 nm single-mode

1300 nm multi-mode

850 nm

1300 nm single-mode

850 nm

1550 nm single-mode

850 nm

2.6.1

DIRECT CONNECTION

If you are using direct fibre connections, IEEE C37.94 protocol will be used at 12 channels of 64kbps. you need to
set the Scheme Setup settings and you are advised to change the Address setting from the default. You find these
settings in the PROT COMMS/IM64 columns. You should not need to use any of the other settings that would be
applicable if using shared links and/or interfacing units.

2.6.2

INDIRECT CONNECTION

For 850nm communications links where the connection is not direct fibre, IEEE C37.94 protocol option is available
to interface with standard telecommunications equipment supporting the IEEE C37.94 interface.

An 850nm fibre-optic interface can connect directly to a multiplexer supporting the IEEE C37.94 standard. 850 nm
multi-mode optical fibres, either 50/125 

m

m or 62.5/125 m are suitable. BFOC/2.5 type fibre optic connectors are

used.

The IEEE

 

C37.94 standard defines an N*64 kbits/s selection, where N is a number between 1 and 12 and selects

the channel used in the multiplexer. For multi-ended line differential, the communication is always 12 channels to
allow optimum protection performance.

P54A/B/C/E

Chapter 15 - Fibre Teleprotection

P54xMED-TM-EN-1

321

Содержание P4A



















































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов