manualshive.com logo in svg

GE P4A, Техническое руководство, Страница: 102 / 850

Поделиться
Скачать
GE P4A Скачать руководство пользователя страница 102

2

SETTINGS APPLICATION SOFTWARE

To configure this device you will need to use the Settings Application Software. The settings application software
used in this range of IEDs is called MiCOM S1 Agile. It is a collection of software tools, which is used for setting up
and managing the IEDs.

Although you can change many settings using the front panel HMI, some of the features cannot be configured
without the Settings Application Software; for example the programmable scheme logic, or IEC61850
communications.

If you do not already have a copy of the Settings Application Software, you can obtain it from General Electric
contact centre.

To configure your product, you will need a data model that matches your product. When you launch the Settings
Application Software, you will be presented with a panel that allows you to invoke the “Data Model Manager”. This
will close the other aspects of the software in order to allow an efficient import of the chosen data model. If you
don’t have, or can’t find, the data model relating to your product, please call the General Electric contact centre.

When you have loaded all the data models you need, you should restart the Settings Application Software and
start to create a model of your system using the “System Explorer” panel.

The software is designed to be intuitive, but help is available in an online help system and also the Settings
Application Software user guide P40-M&CR-SAS-UG-EN-n, where 'Language' is a 2 letter code designating the
language version of the user guide and 'n' is the latest version of the settings application software.

Chapter 5 - Configuration

P54A/B/C/E

76

P54xMED-TM-EN-1

Содержание P4A



















































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов