Appendix A: Login Administration
5495975-1EN Rev.9
A-2
© 2013-2017 General Electric Company. All rights reserved.
If your system is set up for enterprise login, your IT person or administrator will be using more of the fea-
tures.
When equipment is installed in an enterprise environment, the administrator configures the enterprise
groups that the equipment will use. That is, the enterprise environment will have groups for many levels
of access and job descriptions, the administrator will set the individual piece of equipment to use a sub-
set of those groups.
Users are individuals who have permission to use a particular system. Users are created and assigned to
groups by a user with GE Service or Administrator access. These administrators may be IT personnel in
an enterprise environment, or a site manager or lead tech in stand-alone environments. The administra-
tor adds new users and assigns the users to a group which dictates the level of privileges a person will
have. For example, a person named Sue Smith could belong to a group called technologists, radiologists,
administrators, or any combination.
When configuring a system (enterprise or local) always create the groups and assign group privileges
first, then add individual users to the groups.
Configure Applications
1. On the Worklist screen, click [UTILTIES].
2. Select
Preferences > Login Management
.
3. Click [Edit] and brings up the Administration Screen.
Figure A-1
Administration Tab
4. Enter your Username and Password.
