GE Optima IGS 320, Руководство по предварительной установке

Страница: 127 / 202

3.3.3.2.5 2285053 – Through bolts with insert
Table 2-16:
Item Name Part # Description Quan. Notes
Bolt, Hex 2296892 Through Bolt; M20 - 500-400
12 bolts for LC Positioner and
4 bolts for Table
16 pc Through Bolt mounting
method hardware
Washer,
Flat
99142204 Special Flat Washer for Through
Bolts; one for each bolt
16 pc same as above
Plate 2290941 Special Steel Spacer Plate; 4 in. x
4 in. (102 mm x 102 mm); one for
each bolt
16 pc same as above
Nut, Hex 99141607 Hex Nut M20 STL galvanized two
for each bolt
32 pc same as above
Grout assy 2285055 - 10 kg Powdered Mortar Ardex
K-15
- RTV Silicon Rubber Adhesive
- 18 mm making tape adhesive
- Open cell foam
1 kit Used in constructing LC
Positioner grout dam
Dowel 2290937 Wood Dowel; 24 mm diameter 12 pc
Water Elec‐
tric Separa‐
tor
2268647 Manufactured part introduced in
Positioner key hole to fit 1 electri‐
cal conduit of 6”.
1 pc Electrical and water con‐
duits separated inch size.
3.3.3.2.6 2285632 – Floor plate / Base plate assembly
Table 2-17:
Item Name Part # Description Quan. Notes
Hex Screws 2360523 Screw M16x30x30 Inox A4-80
Pass
12 pc For floor plate / Base plate
assembly
Washer 99125091 Washer P 17 mm/40 mm 34 pc 24 are used for the posi‐
tioner integration
Hex Screws 99133570 Screw M16x40x40 Inox A4-80
Pass
10 pc 4 only are used for Omega
NOTE: The kit 2285632 Floor plate / Base plate assembly is needed when the floor plate is
installed. This part isn’t GE part. It’s ordered locally.
Optima IGS 320, Optima IGS 330 Pre-Installation Manual
Direction 5537562-1-1EN, Revision 3
Chapter 2 Equipment Requirements 127