manualshive.com logo in svg

GE Multilin W650, Инструкция по эксплуатации, Страница: 377 / 622

Поделиться
Скачать
GE Multilin W650 Скачать руководство пользователя страница 377

GEK-113032A

W650 Wind Generator Protection System

10-5

10 BOOTCODE AND FIRMWARE UPGRADE

10.2 BOOT CODE UPGRADE

10

10.2BOOT CODE UPGRADE

Boot code upgrade is performed using EnerVista 650 Setup. It is required that there is no active communication between
the program and the relay, and that no configuration file is open.

In this case, menu option 

Upgrade Boot code

 will be enabled under the EnerVista 650 Setup 

Communication

 menu.

During the boot code upgrading process, all the data stored in the relay will be lost, so it is required to save all calibration,
settings, oscillography, etc. from the relay before the upgrade. It is extremely important to save the relay settings and
calibration before continuing with the process.

Figure 10–5: LOST DATA WARNING MESSAGE

To upgrade the boot code, it is required to connect an RS232 cable to the front of the relay, and an Ethernet cable to the
rear port (COM3). The serial communication parameters will be the ones selected in the

 Communications > Computer

menu, where the COMX port (the port to be used in the upgrade) must be selected.

If the connection is made directly from the PC to the relay it is necessary to use a 10/100 Base T crossover cable. During
the upgrade, the system will show the following message indicating the procedure to be followed.

Figure 10–6: SERIAL AND ETHERNET CONNECTIONS FOR BOOT CODE UPGRADE

Содержание Multilin W650















































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов