GE Multilin W650 Скачать руководство пользователя страница 312

Страница: 312 / 622

6-42

W650 Wind Generator Protection System

GEK-113032A

6.4 RECORDS

6 ACTUAL VALUES

6.4.4 DATA LOGGER

The access menu is

Actual > Records > Data Logger

. Once open, this menu will show a screen containing the

information monitored by the relay according to the settings adjusted at “

Setpoint > Product Setup > Data Logger

”, where

the user can select which analog channels will be recorded, as well as the sampling rate.

It must be taken into account that any settings change in the data logger will produce the removal of all the information
stored up to that moment.

The data logger screen diagram shows the time during which the displayed values have been obtained.

The upper part of the window shows the time when the oldest sample was taken, as well as the time when the most recent
value was taken.

Figure 6–11: DATA LOGGER

This screen offers the possibility of storing the data logger record obtained for a further analysis, in COMTRADE format.

Data Logger file retrieval can be performed only via Ethernet communications.

Содержание Multilin W650















































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Multilin W650

Отзывы:

GE Multilin W650, Инструкция по эксплуатации, Страница: 312 / 622

Результаты поиска

Содержание Multilin W650

Отзывы: