GE Multilin DFF Скачать руководство пользователя страница 48

Страница: 48 / 74

KEYPAD AND DISPLAY

GEK-106166E

DFF Digital Feeder Relay

9.2 SETTINGS MENU GROUP.

The DFF relay has some settings groups common to all tables but other groups are particular for each settings table.

The common settings are the following ones:

•

GENERAL SETTINGS

•

ACTIVE TABLE

•

OSCILLOGRAPHY MASK

•

FUNCTION PERMIT

The rest of the setting groups are independent for each of the setting tables.

This menu group allows the user to view and modify the DFF’s settings. To access this group, the

SET

key must be

pressed when the DFF is in the standby mode, showing

DFF - GENERAL ELECTRIC

. The following message will be

displayed:

Pressing either the

↑

↓

keys, the following message will be displayed:

DFF settings menu tree is represented in the following table. It is important to remember that in order to go into the
tree (go from Level 1 to Level 2)

ENT

key must be pressed, and that to come out of the tree (go from Level 2 to Level

1) the

CLR

key must be pressed.

VIEW PROTECTION

SETTINGS

CHANGE PROTECT

SETTINGS

Содержание Multilin DFF











































































Результаты поиска

Содержание Multilin DFF

Отзывы:

GE Multilin DFF, Инструкция по эксплуатации, Страница: 48 / 74

Результаты поиска

Содержание Multilin DFF

Отзывы: