GE Multilin DFF Скачать руководство пользователя страница 41

Страница: 41 / 74

ACCEPTANCE TESTS

DFF Digital Feeder Relay

GEK-106166E

7.13 VOLTAGE FUNCTION CHECKS.

NOTES: Voltage functions operate on phase B voltage. For undervoltage tests, initial voltage must be 10% higher
than trip voltage setting, and for overvoltage tests initial voltage must be 10% lower.

1. 27P UNDERVOLTAGE FUNCTION CHECKS

Set 27 function as follows:

27P PICKUP : 20 Vac

TIME DELAY 27P : 0 s.

RESET TIME 27P: 0 s.

Decrease the voltage and check that the relay trips with 19.4 Vac and drops out with 21.6 Vac

Modify the 27P PICKUP to 65 Vac

Decrease the voltage and check that the relay trips with 63.05 Vac and drops out with 70.2 Vac

Modify the 27P PICKUP to 110 Vac

Decrease the voltage and check that the relay trips with 106.7 Vac and drops out with 118.8 Vac

2. 59P OVERVOLTAGE FUNCTION CHECKS

Set 59P function as follows:

59P PICKUP: 50 Vac

TIME DELAY 59P: 0 s.

RESET TIME 59P: 0 s.

Increase the voltage and check that the relay trips with 51.5 Vac and drops out with 46 Vac

Modify the 59P PICKUP to 135 Vac

Increase the voltage and check that the relay trips with 139.05 Vac and drops out with 124.2 Vac

Modify the 59P PICKUP to 220 Vac

Increase the voltage and check that the relay trips with 226.6 Vac and drops out with 202.4 Vac.

Содержание Multilin DFF











































































Результаты поиска

Содержание Multilin DFF

Отзывы:

GE Multilin DFF, Инструкция по эксплуатации, Страница: 41 / 74

Результаты поиска

Содержание Multilin DFF

Отзывы: