manualshive.com logo in svg

GE Multilin DFF, Инструкция по эксплуатации, Страница: 24 / 74

Поделиться
Скачать
GE Multilin DFF Скачать руководство пользователя страница 24

EQUIPMENT CONFIGURATION 

GEK-106166E 

DFF Digital Feeder Relay 

23 

4.3 LEDS CONFIGURATION 

The DFF system includes 16 user configurable LEDs. Those LEDs can be associated to internal protection events 
and also to internal communication events. One LED, once activated, may blink or remain steady depending on how 
it has been configured. There is also the choice of providing memory to an LED, this means that it will remain lit even 
in the case the condition that activated it disappears. 

In order to configure an LED it is necessary to first configure one internal state to a protection or communication 
event. Once this is done, the LED must be configured to be driven by that protection or communication event. 

To program LED number 12 to be lit when the undervoltage function trips, the following procedure should be 
followed: 

• 

In the Settings/Protection/ Events Menu configure “Protection Event Number 1” to the undervoltage function 
trip. 

• 

In the Settings/General Configuration/LEDs Menu assign LED number 12 to “Protection Event Number 1”. 

 

Содержание Multilin DFF











































































Отзывы:

Нет отзывов