GE Multilin DDFR, Инструкция по эксплуатации

Страница: 94 / 118

86 DISTRIBUTED DIGITAL FAULT RECORDER – INSTRUCTION MANUAL
CONFIGURING THE DDFR ARCHIVER CHAPTER 5: RETRIEVING AND VIEWING DDFR ARCHIVER DATA
5.2.1.1 Archiver Configuration Method 1
If all the DDFRs are within the local network,
Z Press the Discover DDFR button (see section 5.2.4) to have the
DDFR Archiver attempt to locate all the DDFRs on the network.
Any DDFRs discovered that are not already known to the DDFR
Archiver are added to the environment.
Note
The Discover DDFR button allows you to automatically search out and add configured
DDFRs to the DDFR Archiver Setup. A message box will appear which will indicate how
many DDFRs were found and how many DDFRs were added to the archiving system Setup.
The Discover DDFR feature may not work in network configurations where firewalls and/or
routers are between the DDFR Archiver and the DDFRs. The Discover DDFR feature uses
UDP Transport and broadcasts a UDP packet to which the DDFRs respond.
5.2.1.2 Archiver Configuration Method 2
If there are DDFRs outside the local network and the IP addresses are known, you can
manually enter the DDFR information by selecting
Add DDFR and manually entering the
DDFR information.
Z
Once you have entered all the DDFRs into the environment, press
OK to confirm the changes and start monitoring the newly added
DDFRs.
5.2.2 Using the DDFR Archiver Preferences Screen
The Preferences screen allows you to customize the DDFR Archiver.
FIGURE 5–4: Preferences Screen