GE MP100 Series, Руководство по обслуживанию

Страница: 135 / 314

Configuration
2026419-033E CIC Pro™ 6-41
5. After making your selections, choose one of the following:

Click OK or Cancel to apply your changes and close the CIC Setup window.
 Click Apply to apply your changes without closing the CIC Setup window.
6. Verify the new settings prior to monitoring patients.
Mirror another CIC Pro center
Overview
CAUTION
LOSS OF MONITORING — Use caution when configuring mirror
CIC Pro center displays. Since changes at one CIC Pro center can
affect the other display, there may be an inadvertent loss of patient
monitoring at the primary CIC Pro center.
Networked remote displays can provide a duplicate (mirror image) view of a primary
CIC Pro center. When external speakers are connected to the remote displays, audible
alarm tones can also be sounded.
If the mirroring CIC Pro center is located in the same care unit as the primary CIC Pro
center, it can be configured to perform operations such as Admit/Discharge. For
example, if the patient in a display slot is changed at one CIC Pro center, the change is
also automatically performed on the mirroring CIC Pro center.
You can set up a mirror CIC Pro center for remote monitoring. This is set in the
Service mode. Changes made on the primary CIC Pro center are not always made at
the mirror CIC Pro center. When a mirror CIC Pro center is set up, these rules are in
place:

If the user selects new parameters or colors to view on one display, that view is
not
mirrored on the other display.
 Auto Display is disabled at the mirror CIC Pro center. However, it is still active
on the main CIC Pro center. You must click Setup CIC > Display Configuration
> Disable Auto Display at the main CIC Pro center.

The user cannot change the display configuration on the mirror CIC Pro center.
 The title bar of the mirror CIC Pro center displays mirror of [CIC SELECTED] ].
Alarm notification example for mirror CIC Pro center
For example, the following are the names of the primary and mirroring CIC Pro
centers:
 TELE|CIC1 is the primary monitoring central
and
 3North|CIC1 is the CIC Pro center that is mirroring TELE|CIC1
If TELE|CIC1 alarms (audible and visual), does 3North|CIC1 also alarm both audible
and visual? The answer is:

If the mirror CIC Pro center is v5.0.x or later, then alarms will be visual. Also,
you can configure a mirror CIC Pro center running v5.0.x or later to have audible