GE Monogram ZV30RS, Техническое обслуживание руководство, Страница: 8 / 28

– 8 –
3. Label and disconnect the 4 electrical
connectors from the heat lamp switch.
3. Disconnect the electrical connector and
remove the heat lamp panel.
Heat Lamp Socket
Removal and Replacement
WARNING: Heat lamp socket may be hot.
Tech Tip: Use of a plastic putty knife or a taped
metal putty knife helps prevent scratching of
metal surfaces.
1. Remove the
Heat Lamp Panel
.
2. Press the socket clamps in and pull the heat
lamp socket from the heat lamp panel.
3. Loosen the 2 wire retaining screws and
remove the wires from the heat lamp socket.
Clamp
Clamp
2 Screws
Socket
Panel
Lamp
Screw
Screw
Panel
Connector
Clamps
Switch
Connectors
Heat Lamp Switch
Removal and Replacement
1. Remove the
Heat Lamp Panel
.
2. Press the switch clamps in and pull the
switch from the heat lamp panel.