GE Monogram ZV30RS Скачать руководство пользователя страница 5

– 5 –

Warranty

Monogram Hood Warranty

Proof of original purchase date is needed to obtain service under warranty.

What Is Covered

Full One-Year Warranty

For one year from date of original purchase, we will provide, free of charge, parts and service labor in
your home to repair or replace 

any part of the hood

 that fails because of a manufacturing defect.

This warranty is extended to the original purchaser and any succeeding owner for products purchased
for ordinary home use in the mainland 48 states, Hawaii, and Washington, D.C.  In Alaska, the warranty
is the same except that it is LIMITED because you must pay to ship the product to the service shop or
for the service technician’s travel costs to your home.

All warranty service will be provided by our Factory Service Centers or by our authorized Customer
Care

® 

Servicers during normal working hours.

Should your appliance need service, during warranty period or beyond, call 800.444.1845.

What Is Not Covered

•  Service trips to your home to teach you how to use the product.

•  Replacement of home fuses or resetting of circuit breakers.

•  Incidental or consequential damage caused by possible defects with this appliance.

•  Replacement of the filters and light bulbs.

•  Damage to the product caused by accident, fire, floods, or acts of God.

•  Failure of the product if it is used for other than its intended purpose or used commercially.

•  Improper installation.

If you have an installation problem, contact your dealer or installer.  You are responsible for providing
adequate electrical, gas, exhausting, and other connecting facilities as described in the Installation
Instructions provided with the product.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you.  This warranty gives you specific legal rights, and
you may also have other rights which vary from state to state.

To know what your legal rights are in your state, consult your local or state consumer affairs office or
your state’s Attorney General.

Warrantor:  General Electrical Company.  Louisville, KY 4022

5

Содержание Monogram ZV30RS





























Отзывы: