GE Monogram ZV30RS, Техническое обслуживание руководство, Страница: 10 / 28

– 10 –
.
4. Reach behind the hood and pull the rotary
switch out to access the electrical
connectors.
5. Label and disconnect the 7 wires from the
rotary switch and remove the rotary switch.
Switch
Nut
Note: Make sure the pin on the rotary switch is
aligned with the hole in the panel before installing
the nut.
Pin
Hole
Rotary Switch
Removal and Replacement
Note: The procedure to remove both the fan
rotary switch and the light rotary switch are
identical.
1. Remove the
Heat Lamp Panel
.
2. Pull the control knob from the rotary switch.
3. Remove the nut from the front of the rotary
switch
Autotransformer
Removal and Replacement
1. Remove the
Heat Lamp Panel
.
2. Remove the light switch control knob. (See
Rotary Switch
.)
3. Remove the fan switch control knob. (See
Rotary Switch
.)
4. Remove the 7 screws that hold the surface
light panel to the hood.