GE Monogram ZDP486ND, Техническое обслуживание руководство

Страница: 47 / 86

– 47 –
Range Components
Side Access Panel
To remove the side access panel:
Remove the range from the installation. (See 1.
Installation
.)
Place the control panel in the service position. 2.
(See
Control Panel
.)
Remove the three 1/4-in. hex head screws that 3.
attach the side panel to the rear of the range.
Back Panel
The back panel is attached with seventeen 1/4-in.
hex head screws. It is necessary to remove the
range from the installation to access the screws.
(See
Installation
.)
4. Remove the 2 Phillips-head screws from the
front of the side panel.
( Continued next page )