
Advanced Programming
3-27
March 2008
Entering System
Constants (cont.)
Note:
The screen display varies, depending on the measurement
mode selected.
When the
MMS-3
displays measurements that are using a constant, it
will insert or replace the first letter of the mode on the display with
“K.” For example, the
MMS-3
will display DP as KP (dew point) or H
as KH.
You may now do one of the following:
•
To enter a constant for the other channel, press
[NO]
until you
return to the Programming Menu (as shown on page 3-26).
•
Refer to another section and perform a different procedure. Refer
to Figure 3-2 on page 3-48 and Figure 3-3 on page 3-49 to navigate
through the user program.
•
Exit by pressing the
[NO]
key followed by the
[RUN]
key.
Table 3-7: Measurement Modes
Display Abbreviation
Measurement Mode
O*
Oxygen
H
Hygrometry
T
Temperature
P
Pressure
AUX1*
Auxiliary 1
AUX2*
Auxiliary 2
CNST-PPMV
PPMv Multiplication Factor
*System constants are not available for these
measurement modes.
System Menu 1
Use the arrow keys to move the
brackets to
CONSTANT
and press
[YES]
.
CURVES [CONSTANT]
`
Const. Dew Point °C 1
Enter the constant value and
press
[YES]
.
+20.0
Содержание Moisture monitor series 3
