manualshive.com logo in svg

GE MDS iNET Series, Справочное руководство

Поделиться
Скачать
GE MDS iNET Series Скачать руководство пользователя страница 79

05-2806A01, Rev. L

MDS iNET Series Reference Manual

67

2.7.3 RADIUS Configuration

This section covers the authentication settings needed for the iNET radios to access the RADIUS server, 
which is used for Device Level Security and for Wireless Access Security. GE MDS does not provide the 
RADIUS server software.

Operation of Device Authentication

Device authentication forces the radio to authenticate before allowing user traffic to traverse the wireless 
network. When 

Device Security

 is configured to use IEEE 802.1X as the authentication method, Remote 

radios need three types of certificates: public (client), private, and root (Certificate Authority). These files 
are unique to each Remote radio and need to first be created at the server and then installed into each unit 
via TFTP. The certificate files must be in DER format.

Device authentication uses the serial number of each radio as the Common Name (CN) in its certificate and 
in its RADIUS identity field. Each Access Point 

and

 Remote radio must be identified/recognized by the 

RADIUS Server through the Common Name (Serial number) and IP address entries.

NOTE:

Consult your RADIUS network administrator for assistance in configuration, or for help with
other issues that may arise.

To activate device authentication, select 

Device Auth Method

 and set 

IEEE 802.1X

 as the active mode. The 

behavior of this setting differs depending on whether it is implemented on an Access Point or a Remote 
transceiver. An explanation of these behaviors is given below:

Access Point:

 When 

Device Auth Method

 is set to 

IEEE 802.1X

, the AP disassociates all associated Remotes 

and waits for the RADIUS Server to Authenticate the Remotes before allowing data to be passed from them. 
When approval is received from the RADIUS Server, data from the Remote is allowed to pass.

Remote:

 When 

Device Auth Method

 is set to 

IEEE 802.1X

, the Remote halts any data it is passing, and requests 

Authentication from the RADIUS Server. If accepted, data is allowed to be transmitted. The Access Point 
that the Remote connects to must have a valid RADIUS configuration and connection to the configured 
RADIUS server.

Operation of User Authentication

When user authentication is set to 

Local

 or 

RADIUS

, you must enter a valid user name and password before 

being allowed to manage the radio. In 

RADIUS

 mode both of these fields may be up to 40 characters long. 

In 

Local

 mode the user name is 

iNET

 and the password may be up to 8 characters long.

When set to 

RADIUS

, 

all

 logins to the local configuration services are required to be authenticated via the 

RADIUS Server, including telnet and SSH (Secure Shell) sessions. Authentication must be accepted before 
access to the radio menu is granted.

Содержание MDS iNET Series














































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды