GE MDS iNET Series, Справочное руководство

Страница: 31 / 173

05-2806A01, Rev. L MDS iNET Series Reference Manual 19
Invisible place holder
Figure 2-6. Starting Information Screen—Local Console Session
(Telnet has similar menu structure)
Starting a Telnet Session
NOTE:
This method requires that you know the IP address of the unit beforehand. If you do not know the
address, use the Local Console method (above) and access the
Starting Information Screen . The
address is displayed on this screen.
1. Connect a PC to the unit’s LAN port, either directly or via a network. If connecting directly, use an
Ethernet crossover cable; if connecting via a network, use a straight-through cable. The
LAN
LED
lights to indicate an active connection.
NOTE:
When using Ethernet to access the unit, it may be necessary to change your computer’s IP access
to be compatible with the radio IP address. You can identify or verify the unit’s IP address by
using a Local Console session to communicate with the radio through its
COM 1 Port and viewing
the Starting Information Screen .
2. Start the Telnet program on your computer targeting the IP address of the unit to which you are con-
nected. and press .
TIP: A Telnet session can be started on most PCs by selecting:
Start>>Programs>>Accessories>>Command
Prompt
. At the command prompt window, type the word
telnet
, followed by the unit’s IP address ( e.g. ,
telnet 10.1.1.168
). Press to receive the Telnet log in screen.
NOTE:
Never connect multiple units to a network with the same IP address. Address conflicts will result
in improper operation.
3. Enter your username, if applicable (default username is
iNET
or
iNET-II
, in accordance with radio model).
Press .
Next, the
Password:
prompt appears. Enter your password (default password is
admin
). (For security,
your password keystrokes will not appear on the screen.) Press .
ENTER
ENTER
ENTER
ENTER