GE MAC 800, Руководство оператора

Страница: 50 / 154

Entering Patient Information
Receive Orders from a MUSE System
Preparation
The MUSE system can communicate orders to this system in the following ways:
• Via modem (internal or external) (only if modem or serial communication to the
MUSE system is enabled)
• Via LAN (only if LAN communication to the MUSE system is enabled)
• Via WiFi (only if WiFi communication to the MUSE system is enabled)
Load the Orders
1. Select Order Manager . The Order Manager interface opens.
2. Select Load Orders .
3. Enter the location(s) from which the device should retrieve the orders.
Select the Orders to Receive
1. Select one or more orders.
2. Select Load Orders again. The system stores the orders
Select an Order to Complete
1. Choose Select .
2. Select an order.
3. Select OK to proceed with selecting this order.
The system will do one of the following:
• The Resting ECG screen displays.
• Allow you to select Cancel to abort the selection of this order.
You can then select a different order to complete.
Complete the Order
1. Select Patient Data .
The patient data window for this patient displays.
2. Enter patient data or modify the patient data that is displayed.
3. Select Save to save patient information or Cancel to return to Resting ECG
screen.
4. Acquire a 10s ECG to complete this order.
This system will then go to the ECG test.
50 MAC™ 800 2060026-001C