GE LOGIQworks, Базовое руководство по обслуживанию

Страница: 265 / 420

GE M
EDICAL
S
YSTEMS
D
IRECTION
5184024-100, R
EVISION
5 LOGIQ
WORKS
® B
ASIC
S
ERVICE
M
ANUAL
Chapter 3 Installation 3-199
3-5-11-1 Reading DICOM volume from DVD or CD
(cont’d)
4.) Use the copy settings from drop-down list to indicate the list whose settings should apply to the one
you created. (Default: Local Studies)
5.) Click ok and view the worklist by selecting it from the Worklist View drop-down list on the Data
Selector tab.
6.) Double-click the study to view it. Note that you can only view the study if the Direct View check box
on the General tab of the Viewing Properties dialog box is checked (please refer to Section 3-5-2-
12 "Viewing Properties" on page 3-99 ).
7.) If you want to import the study, select it, right-click it and then left-click Import from the shortcut
menu. LOGIQworks will return the file to the worklist view where it came from.
3-5-11-2 Writing a DICOM volume to DVD or CD-R/RW (SME)
The system must be licensed for use with Single Media Exchange (SME) option in order to be able to
write data to CD-R/RW and/or DVD. In addition the system needs to be equipped with the HP DVD
Writer for writing data to DVD.
It is recommended to add a new column to the Data Selector for the Single Media Exchange option
(SME). To do so, right click on the column heading to the right of where you want to insert the new
column and select Insert column.
Figure 3-176 Data Selector Tab - Worklist View
Figure 3-177 Import Study