GE LOGIQworks, Базовое руководство по обслуживанию

Страница: 199 / 420

GE M
EDICAL
S
YSTEMS
D
IRECTION
5184024-100, R
EVISION
5 LOGIQ
WORKS
® B
ASIC
S
ERVICE
M
ANUAL
Chapter 3 Installation 3-133
3-5-4 Connection Service Properties up to LOGIQworks 1.3
3-5-4-1 General
The General Tab contains a collection of generic settings for the Connection Service.
To view these setting:
1.) Select
Configuration
>
Connection Service...
from the Data Selector menu.
2.) Select the General tab from the Connection Service Properties page.
•
ROOT Directory:
Root directory for the files for the Connection Service. This is where the file to
start the Connection Service (connect.exe) resides.
•
Work Directory:
Directory to create temporary files used by the Connection Service.
•
Pipe Name:
General pipe used by RadWorks to interface to the Connection Service
NOTE
ONLY CHANGE THE DEFAULT SETTINGS IN THE CONNECTION SERVICE PROPERTIES IF YOU
ARE AN EXPERT!
Figure 3-119 Connection Service Properties - General (Default Settings)
Administrator only