GE LOGIQ P3 PRO, Руководство по обслуживанию, Страница: 327 / 348

GE PROPRIETARY TO GE
D
IRECTION
5308917-100, R
EVISION
8 LOGIQ P3 S
ERVICE
M
ANUAL
Chapter 10 Care & Maintenance 10-9
10-5-2-2 Peripheral/Option Checks
If any peripherals or options are not part of the system configuration, the check can be omitted. Refer
to the User Manual for a list of approved peripherals/options.
10-5-3 Input Power
10-5-3-1 AC Power Inspection
10-5-4 Cleaning
10-5-4-1 General Cleaning
Table 10-8 GE Approved Peripheral/Hardware Option Functional Checks
Step Item Description
1 B/W Printer
Verify hardcopy output of the B/W video page printer. Clean heads and covers if necessary.
2 Color Printer Verify hardcopy output of the Color video page printer. Clean heads and covers if necessary.
3 DICOM
Verify that DICOM is functioning properly. Send an image to a DICOM device.
4 Footswitch
Verify that the footswitch is functioning as programed. Clean as necessary.
5 ECG
Verify basic operation with customer.
6 DVD
Verify that the DVD is functioning properly. Clean heads and covers if necessary.
Table 10-9 AC Inspection
Step Item Description
1 Unplug Cord Disconnect the mains cable from the wall and system.
2 Inspect
Inspect it and its connectors for damage of any kinds.
3 Verify
Verify that the LINE wires are properly attached to the terminals, and that no strands may cause a short
circuit.
Table 10-10 General Cleaning
Step Item Description
1 Console
Use a fluid detergent in warm water on a soft, damp cloth to carefully wipe the entire system. Be careful
not to get the cloth too wet so that moisture does not enter the console.
2 Probe Holder Clean probe holders. (they may need to be soaked to remove excess gel).
3 LCD
Use a soft, non-abrasive folder cloth. Gently wipe the LCD face. DO NOT use a glass cleaner that has a
hydrocarbon base (such as Benzene, Methy Alcohol or Methy Ethyl Ketone) on LCD with the filter (anti-
glare shield).