GE Logiq 500, Руководство пользователя

Страница: 459 / 579

User Define Function
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0
14–97

User Define Function
Overview
Six keys in the middle of the right side of the console keyboard
as well as alphanumeric (A/N) keys A
Z 1 0 may be
programmed to duplicate a single keystroke or a sequence of
64 keystrokes maximum.
A keystroke is considered to be a press of a key, one
movement of a knob or movement of the Trackball.
Programming the User Define Function
S
Access the User Define function by pressing the Set Up
Top Menu Select key.
S
Select User Define from the Set Up Sub-Menu.
S
Perform the keystroke or sequence of keystrokes to be
programmed.
S
When complete, press the desired User Define key number
or A/N key to record the programming.
S
The system will ask: “Save data? ‘Y’ or ‘N’.” Press ‘Y’ on
the keyboard to save the user define sequence. Press ‘N’
to cancel the user define programming function.
S
If a sequence is already assigned to the selected key, the
message will be displayed:
“Overwrite Existing data? ‘y’ or ‘n’”
User Define keys that have been programmed will be half
lighted (back lit).