manualshive.com logo in svg

GE L60, Инструкция по эксплуатации

У нас есть бесплатное руководство пользователя и установки для продукта N1C L60. Вы можете скачать его с нашего сайта manualshive.com. Получите подробные инструкции по использованию и установке этого товара, чтобы сделать процесс еще проще и удобнее.

Поделиться
Скачать
background image

3-70

L60 LINE PHASE COMPARISON SYSTEM – INSTRUCTION MANUAL

CONNECT TO D400 GATEWAY

CHAPTER 3: INSTALLATION

3

When EIC 61850 and version is 7.30 or later, the file is added and time stamp is unchanged. When clicking in the 
software on the tree element, a device folder is created, the original file moves into it, SCL files are generated there, 
and the "Last modified" time stamp on the URS file changes.

3.11  Connect to D400 gateway

A GE Multilin D400 Substation Gateway can be used to collect data from UR devices in a local area network (LAN). It collects 
metering, status, event, and fault report data from serial or LAN-based intelligent substation devices, and it pre-processes 
the data. The D400 supports up to 16 serial and eight network connections, with multiple devices possible on each serial 
connection. Up to 10 concurrent file transfer sessions are possible, meaning data for up to 10 URs can be transferred at 
the same time and any additional IEDs are queued on a first-come-first-served basis. The D400 can then upload files to a 
demilitarized zone (DMZ) server at the enterprise level.
Setup is as follows. For UR devices with the CyberSentry software option, when there is a need to retrieve periodically the 
logs from the UR securely without a human interface, the following approach can be used. See the D400 manual for 
configuration details to achieve it.
A UR in the substation can authenticate a user either connecting to a RADIUS server or on the device itself. This depends 
on the user name used for authentication on a connection. The D400 connects to the UR device using an Ethernet, USB, or 
serial port on the UR. The Ethernet connection can be ST or RJ-45 type. The serial connection can be RS232 or RS485. At 
the other end, a cable attaches to the rear of D400. Use the D400 software to configure a serial or network 
communication/connection for the UR, then to configure the IED device blocks/clients for the UR, and then to configure 
record retrieval. Once configured, the UR and D400 use a keyfile authentication mechanism to establish communication.
For UR devices with the IEC 61850 software option, also use the D400 IEC 61850 Loader software.
When a D400 detects new files available for download from a UR, it connects to the UR and reads the files via sFTP 
protocol. The following files can be transferred:
•

Oscillography files

•

Event  records

•

Log files

•

Configuration (setting) files

The D400 information is viewable in its software and in a web browser.

3.11.1  Oscillography files

These are stored in COMTRADE format in the D400 folder system using the UR site and device name.

3.11.2  Event records

These are stored as the EVT.TXT file in the D400 folder system using the UR site and device name.

3.11.3  Log files

Log files can be retrieved for UR 7.0 and later. The following file types are possible, stored in the D400 folder system using 
the UR site and device name:
•

factory_event.txt — Information about change methods and origins. Saved with a "_YYMMDDhhmmss" retrieval time 
stamp, for example FACTORY_EVENT_170525183124.TXT.

•

setting_changes.log — Information on what settings have been changed. Saved with a "_YYMMDDhhmmss" retrieval 
time stamp, for example SETTING_CHANGES_170525183124.TXT.

Содержание L60

































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для L60

Valve Concepts 5400 Installation, Operation And Maintenance Manual preview
5400
Бренд: Valve Concepts Страницы: 16
QCON ProX Setup preview
ProX
Бренд: QCON Страницы: 4
Dantherm DRC1 Instructions Manual preview
DRC1
Бренд: Dantherm Страницы: 96
Accel 300+ Installation Instructions Manual preview
300+
Бренд: Accel Страницы: 8
hager coviva Smartbox TKP100A Quick Manual preview
coviva Smartbox TKP100A
Бренд: hager Страницы: 4
Vag ZETA Operating And Maintenance Instructions Manual preview
ZETA
Бренд: Vag Страницы: 12
RADEMACHER 2696 Instruction Manual For The Electrical Connection And For Commissioning preview
2696
Бренд: RADEMACHER Страницы: 48
Bardiani Valvole BBZO BBZOG Instruction Manual preview
BBZO BBZOG
Бренд: Bardiani Valvole Страницы: 24
ICP DAS USA M-7067D Quick Start Manual preview
M-7067D
Бренд: ICP DAS USA Страницы: 6
Harman FG2106-04 Quick Start Manual preview
FG2106-04
Бренд: Harman Страницы: 2
Linear Technology LT3507 Demo Manual preview
LT3507
Бренд: Linear Technology Страницы: 6
Nortek WRC4 Owner'S Manual preview
WRC4
Бренд: Nortek Страницы: 24
National Instruments MXI-Express Gen-3 x16 User Manual preview
MXI-Express Gen-3 x16
Бренд: National Instruments Страницы: 38
E-T-A EtherNetIP ControlPlex CPC12EN Quick Start Manual preview
EtherNetIP ControlPlex CPC12EN
Бренд: E-T-A Страницы: 7
D+H TMA-1-D4-D12 Quick Start Manual preview
TMA-1-D4-D12
Бренд: D+H Страницы: 4
NuTone 329H Instructions preview
329H
Бренд: NuTone Страницы: 4
VECTOR CONTROLS TCX2 Product Data Sheet preview
TCX2
Бренд: VECTOR CONTROLS Страницы: 10
Crosswater US-DL2001RC Installation Instructions preview
US-DL2001RC
Бренд: Crosswater Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды