GE L60, Инструкция по эксплуатации, Страница: 425 / 498

GE Multilin L60 Line Phase Comparison Relay B-39
APPENDIX B B.4 MEMORY MAPPING
B
9B94 Teleprotection Channel 2 Number of Lost Packets 0 to 65535 --- 1 F001 0
9B95 Teleprotection Network Status 0 to 2 --- 1 F134 2 (n/a)
9BA0 Teleprotection Channel 1 Input States 0 to 1 --- 1 F500 0
9BA1 Teleprotection Channel 2 Input States 0 to 1 --- 1 F500 0
9BB0 Teleprotection Input 1 States, 1 per register (16 items) 0 to 1 --- 1 F108 0 (Off)
9BC0 Teleprotection Input 2 States, 1 per register (16 items) 0 to 1 --- 1 F108 0 (Off)
VT Fuse Failure (Read/Write Setting) (6 modules)
A040 VT Fuse Failure Function 0 to 1 --- 1 F102 0 (Disabled)
A041 ...Repeated for module number 2
A042 ...Repeated for module number 3
A043 ...Repeated for module number 4
A044 ...Repeated for module number 5
A045 ...Repeated for module number 6
Pilot POTT (Read/Write Setting)
A070 POTT Scheme Function 0 to 1 --- 1 F102 0 (Disabled)
A071 POTT Permissive Echo 0 to 1 --- 1 F102 0 (Disabled)
A072 POTT Rx Pickup Delay 0 to 65.535 s 0.001 F001 0
A073 POTT Transient Block Pickup Delay 0 to 65.535 s 0.001 F001 20
A074 POTT Transient Block Reset Delay 0 to 65.535 s 0.001 F001 90
A075 POTT Echo Duration 0 to 65.535 s 0.001 F001 100
A076 POTT Line End Open Pickup Delay 0 to 65.535 s 0.001 F001 50
A077 POTT Seal In Delay 0 to 65.535 s 0.001 F001 400
A078 POTT Ground Direction OC Forward 0 to 65535 --- 1 F300 0
A079 POTT Rx 0 to 65535 --- 1 F300 0
A07A POTT Echo Lockout 0 to 65.535 s 0.001 F001 250
Selector Switch Actuals (Read Only)
A400 Selector 1 Position 1 to 7 --- 1 F001 0
A401 Selector 2 Position 1 to 7 --- 1 F001 1
Selector Switch (Read/Write Setting) (2 modules)
A410 Selector 1 Function 0 to 1 --- 1 F102 0 (Disabled)
A411 Selector 1 Range 1 to 7 --- 1 F001 7
A412 Selector 1 Timeout 3 to 60 s 0.1 F001 50
A413 Selector 1 Step Up 0 to 65535 --- 1 F300 0
A414 Selector 1 Step Mode 0 to 1 --- 1 F083 0 (Time-out)
A415 Selector 1 Acknowledge 0 to 65535 --- 1 F300 0
A416 Selector 1 Bit0 0 to 65535 --- 1 F300 0
A417 Selector 1 Bit1 0 to 65535 --- 1 F300 0
A418 Selector 1 Bit2 0 to 65535 --- 1 F300 0
A419 Selector 1 Bit Mode 0 to 1 --- 1 F083 0 (Time-out)
A41A Selector 1 Bit Acknowledge 0 to 65535 --- 1 F300 0
A41B Selector 1 Power Up Mode 0 to 2 --- 1 F084 0 (Restore)
A41C Selector 1 Target 0 to 2 --- 1 F109 0 (Self-reset)
A41D Selector 1 Events 0 to 1 --- 1 F102 0 (Disabled)
A41E Reserved (10 items) --- --- 1 F001 0
A428 ...Repeated for Selector 2
DNP/IEC Points (Read/Write Setting)
A500 DNP/IEC 60870-5-104 Binary Input Points (256 items) 0 to 65535 --- 1 F300 0
A600 DNP/IEC 60870-5-104 Analog Input Points (256 items) 0 to 65535 --- 1 F300 0
Flexcurves C and D (Read/Write Setting)
A900 FlexCurve C (120 items) 0 to 65535 ms 1 F011 0
A978 FlexCurve D (120 items) 0 to 65535 ms 1 F011 0
Non Volatile Latches (Read/Write Setting) (16 modules)
AA00 Non-Volatile Latch 1 Function 0 to 1 --- 1 F102 0 (Disabled)
AA01 Non-Volatile Latch 1 Type 0 to 1 --- 1 F519 0 (Reset Dominant)
Table B–9: MODBUS MEMORY MAP (Sheet 32 of 47)
ADDR REGISTER NAME RANGE UNITS STEP FORMAT DEFAULT