background image

DISCLAIMER

 : 

DO NOT USE OR INSTALL ANY ADDITIONAL CHRISTMAS 

LIGHTING OR ORNAMENTATION THAT IS POWERED BY A LIGHT BULB 
SOCKET. DOING THIS MAY RESULT IN DAMAGE TO YOUR CHRISTMAS 
TREE OR CAUSE PERSONAL INJURY. DOING THIS, WILL RESULT IN A 
VOID OF THE LIMITED WARRANTY OF THIS PRODUCT. 

Nicolas Holiday Inc. thanks you for purchasing this pre-lit Christmas 
tree. Should you have any problems with your tree, visit us at 

www.geholidaylighting.com

 for more information. You can call our 

toll free number at 1-877-398-7337. 
Check our website for latest service hours and assembly instruction videos.

The tree stand should be open and set at 90  angle. 
Remember to tighten the thumbscrew after 
connecting section A and tree stand. See 

{Fig. B} 

Untwist the 

red

 metal tie wrap holding the 

branches in place.
Gently position any branches that do not fall 
into place. 

2.

 When you connect two tree sections, 

it is important that you align the mark 
on the tree poles. See 

{Fig. C}

Thumbscrew

90

B

8.25”x11.25”

C

Disconnect the decorative item from the power source before 

performing any maintenance or cleaning.

GE is a trademark of General Electric Company 
and is under license by Nicolas Holiday Inc.

Distributed by Nicolas Holiday Inc.,
©2019 Nicolas Holiday Inc.,9 F., No. 37, Guangfu North Rd.
Taipei, Taiwan 10560     All rights reserved.
120V    Printed in China       

PRS19-ONEPLUG-MICRO

     

       

  

For indoor use only

THIS IS NOT A TOY, FOR DECORATIVE USE ONLY.

  

             

GE Branded Christmas Trees

Pre-Shaped

naturally positioned branch tips, 

create the look of a natural tree

Easy Light Technology

®

eliminates cord connections

Assembly Instructions

1.

 Carefully unpack, removing any bubble wrap and inspect the 

contents of your tree. 

{Fig. A}

IMPORTANT: 

Store your carton neatly in a cool, dry location protected from 

sunlight to prolong the tree life and to better keep the light sets in working order. 
Do not place a heavy load on the carton to avoid damage to or crushing the carton 
and tree inside.

Troubleshooting Tips

If the tree does not illuminate, try stepping on the 

On/off foot pedal

 and make certain 

the wall switch is turned on.

If one section of your tree does not illuminate, check that section for cut or damage wires 
or that all electrical connections on tree are made.
Due to unique construction of the light sets, the individual LEDs are not replaceable. 
The light sets are designed for continued operation even if an individual LED fails to light.

TOP

A

B

A

TREE ASSEMBLY DIAGRAM

AC PLUG

FOR 

TREE TOP

TOP

B

A

7.5’

NOTE:

  

No tools required 

                                         

Tree Sections        Tree Stand 

Approx. Asm Time

 *

7.5 ft trees                                 3                         Metal 

  10 – 15 minutes

SPARE PARTS:

 Your tree includes a plastic bag containing spare two (2) 3-amp fuses 

as replacements for the plug.

Tree Storage

1.     Remove the tree’s main extension cord plug from the wall outlet.

2.     Starting at the top, disconnect the top and section B.

Step A:

 Gently fold the branches up 

              toward the center. 

              Care should be taken 

              to avoid damage to the lights.

3.     Disconnect sections B and A.

4.     Refer to the drawing on how to 

        repack your tree.

7.5 FT TREES

B

A

TOP

On/off foot pedal

Dimmer

4. 

This tree features adjustable lamp brightness 

by using the provided foot switch controller. 
Adjust the tree lamp brightness by stepping on 
the foot switch repeatedly, which offers four (4) 
brightness levels and off.

3.

 Assemble section by section.Firmly seat both sections together.

Note

a. Always unplug this product before installing. 
    Do not plug in tree to a power outlet until the entire tree is assembled.
b. This tree is provided with an extension cord for a tree topper, which can be
     attached to the top section along the pole.

 c. As an option, the tree adapter can be plugged into the back of the tree top
     extension cord as an add-on. This feature allows you to utilize only one outlet.

 

Отзывы: