13
Consumer Support
Operating Instructions
Safety Instructions
Installation Instructions
Tr
oubleshooting T
ips
Your oven is controlled by a single
OVEN
CONTROL
knob.
It will normally take 30–90 seconds before
the flame comes on. After the oven reaches
the selected temperature, the oven burner
cycles—off completely, then on with a full
flame—to maintain the selected
temperature.
NOTE:
When you first plug in the range or after a
power failure, the entire Clock display will light up.
Press the
SET CLOCK
pad.
Press and hold the
+
or
–
pad
and the time of day will change
10 minutes at a time. To change the
time by single minutes, give the pads
short taps.
Press the
SET CLOCK
pad to start
the clock.
Using the oven.
www.GEAppliances.com
To Set the Clock
(on some models)
Oven Control