GE JD968BKBB - Profile, Размеры и информация по установке

Страница: 1 / 2

For answers to your Monogram,
®
GE Profile
™
or
GE ® appliance questions, visit our website at
ge.com or call GE Answer Center
®
service,
800.626.2000.
JD968TK/BK
GE Profile
™
30" Drop-In Electric Range
Specification Revised 8/05
220829
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
R
Listed by
Underwriters
Laboratories
Dimensions and Installation Information (in inches)
Note: Cabinets installed adjacent to slide-in ranges must have an
adhesion spec of at least 194° temperature rating.
Note:
To reduce possibility of scorching the side walls above the
countertop when no load is present on burners, it is recommended
that a minimum of 6" spacing from adjacent side wall be allowed for
possible extended, high-heat, element operation.
IMPORTANT:
30" DROP-IN RANGES ARE DESIGNED TO HANG
FROM THE COUNTERTOP. IT DOES NOT REST ON THE FLOOR.
FOR INSTALLATION ALTERNATIVES, REFER TO INSTALLATION
INSTRUCTIONS PACKED WITH PRODUCT.
Optional Kits For Drop-In Electric Ranges (Available At Additional Cost)
KW Rating
240V
11.6
208V 8.7
Breaker Size
240V 40 Amps
208V
40 Amps
Installation information:
Before installing, consult installation
instructions packed with product for current dimensional data.
Acceptable Electrical Outlet
Area Also In Adjacent
Cabinet Or Under Floor
Conduit is 40" long
Shave Raised Edge To Clear
31-1/8" Wide Control Panel
9/16
30" Min.
30" Min.
18" Min.
6" Min.
from walls
7-1/2
2-7/8"
To Front Surface
of Countertop
30
36
27-1/2
25
23-3/16
If necessary,
build upsides
to 1-1/4" thick
to provide
countertop
support
26-1/2
27
20-5/8" Door
Clearance
From Front
Surface of
Countertop
*JXS37 is 5-1/4"
and JXS32 is 4"
24
31-1/4
30
A/B*
Accessory
Backguard
Acceptable Electrical Outlet
Area Also In Adjacent
Cabinet Or Under Floor
Conduit is 40" long
Shave Raised Edge To Clear
31-1/8" Wide Control Panel
9/16
30" Min.
30" Min.
18" Min.
6" Min.
from walls
7-1/2
2-7/8"
To Front Surface
of Countertop
30
36
27-1/2
25
23-3/16
If necessary,
build upsides
to 1-1/4" thick
to provide
countertop
support
26-1/2
27
20-5/8" Door
Clearance
From Front
Surface of
Countertop
*JXS37 is 5-1/4"
and JXS32 is 4"
24
31-1/4
30
A/B*
Accessory
Backguard
Accessory Backguards
(Attaches to the back of
range as a backguard when
unit is installed in 30"
free-standing cutout)
JXS32SS (Stainless) - 4" High
JXS32WW (White) - 4" High
JXS32CC (Bisque) - 4" High
JXS32BB (Black) - 4" High
JXS37WW (White) - 5-1/4" High
JXS37CC (Bisque) - 5-1/4" High
JXS37BB (Black) - 5-1/4" High
Maintop Filler
(Fills gap between
cooktop and wall when
unit is installed in 30"
free-standing cutout)
JXS66WW—White
JXS66CC—Bisque
JXS66BB—Black