Specification Created 5/04
321636
GE Appliances
JBS55WJ/BJ – GE
®
30" Free-Standing Electric Range
Dimensions and Installation Information (in inches)
*Dimension from wall to front of closed door handle is 27-3/4".
†
Note:
Check local codes for required breaker size.
A properly grounded branch circuit with a 3 prong grounding type receptacle is required for
GE ranges.
Receptacle Locations
Locally approved flexible service cord or conduit must be used because terminals are not
accessible after range installation. See shaded area in drawing for location of electrical outlet
box. Recommended outlet locations allow range to be installed directly against wall.
Note:
Conforms to U.L. requirements for 0" spacing for adjacent walls below countertops.
To reduce possibility of scorching walls, it is recommended a minimum of 1-1/2" spacing be
allowed from adjacent side walls to allow for possible extended, high-heat, no-load heating
element operation.
Installation Information:
Before installing, consult installation instructions packed with
product for current dimensional data.
R
Listed by
Underwriters
Laboratories
For answers to your Monogram,
®
GE Profile
™
or
GE
®
appliance questions, visit our website at
GEAppliances.com or call
GE Answer Center
®
service, 800.626.2000.
Amp Rating
240V
10.5
208V
7.9
Breaker Size
40 Amps
†
�
30
25
2-1/2
7-1/2
29-7/8
25-3/8
47-5/8
44-7/16
2-1/2
Acceptable electrical�
outlet area
Preferred electrical�
outlet area�
Roughed-in dimensions
Electrical outlet locat ABC.eps
46-7/8
*
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
