GE IDP-1111 Скачать руководство пользователя страница 55

Страница: 55 / 114

Chapter 5

Advanced programming

Advanced page

The

Advanced

page of the

Presets

page (under the

Actions

menu) allows you to change a camera’s feature

settings for individual presets.

To access the

Advanced

page of

Presets

, select

Actions

Presets

, and

Advanced

Figure 30. Advanced page

Note:

Remember to select

to save any changes you make on the page.

No.

The

No.

drop-down box allows you to select the preset number that you want to program.

Title.

The

Title

box shows you the existing title for the selected preset number. You can customize the

default title on the

Display

page.

Use custom camera state for preset.

The

Use custom camera state for preset

feature overrides the

settings that were set for the camera’s normal operation under

Camera | Settings

, if checked. You must

check this feature to make the other features on this page available.

Night mode.

For individual presets, you can use the

Night mode

feature to change the camera’s

Day/Night

setting. See

Page1 page

on page 34 for details about the

Day/Night

feature and its interactions with the

Exposure

feature settings. Choices are Off (default) and On.

When you turn on the

Night mode

feature, you are telling the camera to override the normal

Day/Night

operating setting as follows:

•

Auto

: If the

Day/Night

feature is set to Auto under

Camera | Settings

, then the

Night mode

feature

will use the

Day/Night

setting customized for the preset for 5 to 10 seconds. After 5 to 10 seconds,

the camera will revert to the normal operating setting and adjust for the current light conditions.

•

Manual

: If the

Day/Night

feature is set to Manual under

Camera | Settings

, then the

Night mode

feature will use the

Day/Night

setting customized for the preset until the preset is left. After the preset

is left, the camera will revert to the

Day/Night

setting that it was using before the preset was called.

•

Disabled

: If the

Day/Night

feature is set to Manual under

Camera | Settings

, then the

Night mode

feature will do nothing.

Содержание IDP-1111



















































































































Результаты поиска

Содержание IDP-1111

Отзывы:

GE IDP-1111, Руководство пользователя, Страница: 55 / 114

Результаты поиска

Содержание IDP-1111

Отзывы: