GE H48681XB, Руководство по обслуживанию, Страница: 121 / 366

3.13.4 InSite ExC Configuration
Prerequisites for InSite Setup
If not already available, collect the following information from the hospital network administrator:
1.
Proxy Server, if necessary
__________ / __________ / __________ / __________ and Port ________
2. Proxy Authentication, if necessary
User ____________________________________ and Password
_________________________________________
Configuration Steps
1. Enter the Common Service Desktop (CSD).
Note
There are different possibilities to access the Common Service Desktop and its available features; see
Section 5.12.2 "Access / Security" on page 5-39 .
2. Select the
Configuration
page, then double-click
InSite ExC Agent Configuration
(A).
Figure 3-75 Common Service Desktop - Configuration
Note This example shows fictional numbers!
3. Fill out at least all bold stated mandatory fields in the Agent Configuration section (B).
-
The Device Name (pre-populated) and the CRM field have to be prefix KE6 or KE8 + systems
serial number without prefix letter; e.g. KE810026.
-
Select
Continent
and
Country
from the pull-down menu.
-
Enter
City
,
State
,
Postal Code
and
Institution
where the system resides.
4. Check settings in the Advanced Configuration section (C).
-
Enterprise Server
- PRODUCT
-
Service Center
- EURO
-
Log Level
- WARN
Setup Instructions
Voluson E-Series Service Manual
KTD106657 Revision 2
3-77