HOW TO OPERATE YOUR DISHWASHER
STEP 1. Load your dishwasher with dishes, silverware,
pots, pans, bowls, etc., according to the Loading section.
STEP 2. Add detergent to the detergent dispenser.
Make sure the Cycle Indicator Dial is at OFF position
before adding detergent. (See Detergent Guide.)
Use rinse aid agent to help prevent spotting.
Occasionally check to insure that rinse agent
container is at least half full. (See How to Use
a Rinse Agent section. )
STEP 3. Select drying option.
I
HEATED DRY. Turns the
drying heater on for fast drying.
ENERGY SAVER (No Heat Boost).
Turns the drying heater off to save
energy. Dishes will dry naturally
over a longer period such as overnight.
If you need your dishes sooner, open the dishwasher
door after the cycle is complete to reduce the natural
drying time.
NOTE: The ENERGY SAVER option
also
the WASH HEAT BOOST. To obtain WASH HEAT
BOOST without HEATED DRY, select only the WASH
HEAT BOOST option. (See Energy-Saving Tips.)
STEP 4. WASH HEAT BOOST
Option. See How to Test Water
Temperature section.
The entering water must be
between
and
Use the wash heat boost
option when water is less than
When selected, the wash cycle will be extended for21
minutes while the dishwasher heats the water for good
washing and drying.
STEP 5. Select the wash cycle and start the dishwasher.
(See Cycle Selection Hints.)
If your dishwasher drains into a food waste disposer,
operate the disposer until it is empty before starting the
dishwasher.
When NOT using DELAY START (for
cycles):
a. Be sure door unlatched.
b. Push selected cycle button.
.
-
c. Push selected option button.
d. Slowly turn Cycle Indicator
OFF
■
Dial to START.
●
\
WA
e.
Latch the door to start
I
the dishwasher. There is a
■
RINSING
time
delay between start-up and water fill so you
not hear any wash action right away.
When using DELAY START (for
cycles):
NOTE: START can be delayed automatically for up
to 6 hours.
a. Be sure door unlatched.
.*
b. Push selected cycle button.
c. Push selected option button.
OFF
■
d. Slowly turn Cycle Indicator
“
v
’
N
’
Dial to desired delay time.
I
e. Latch door to start timer.
RINSING
The DELAY START light will come on and
stay on until dishwasher starts. Dishwasher will
start automatically at end of selected delay time.
Cycle Selection Hints
is important to follow the Loading instructions.
●
items such as pots, pans and
casseroles with dried-on or baked-on soils. Everyday
dishes may be included.
●
NORMAL WASH—For loads of everyday dishes,
glasses and cookware with medium soils. Designed
to yield high performance on normal soils.
●
WATER SAVER—For most loads of everyday
dishes with light soils or soils that have not dried
on. Also for everyday dishes that have had extra
preparation before loading. It saves hot water over
the higher performance cycles, saving energy.
●
RINSE & HOLD—For rinsing partial loads which
will be washed later. Do not use detergent. Delay
Start is not recommended for this cycle.
4