HOW TO OPERATE YOUR DISHWASHER
STEP 1. Load your dishwasher with dishes, silverware,
pots, pans, bowls, etc., according to the Loading section.
STEP 2. Add detergent to the detergent dispenser.
Make sure the Cycle Indicator Dial is at OFF position
before adding detergent. (See Detergent Guide).
Use rinse aid agent to help prevent spotting.
Occasionally check to insure that rinse agent container is
at least half full. (See How to Use a Rinse Agent section).
STEP 3. Select drying option.
HEATED DRY. Turns the
drying heater on for fast drying.
ENERGY SAVER (no heat boost).
Turns the drying heater off to save
energy. The dishes will dry naturally
❑
over a longer period such as overnight.
If you need your dishes sooner, open the dishwasher
after the cycle is complete to reduce natural drying time.
Use of this option reduces electrical energy used
by this model approximately
for the NORMAL
WASH cycle.
STEP 4. WASH HEAT BOOST Option.
To test water temperature, see “How
To Test Water Temperature section.”
The entering water must be between
and
Use the WASH HEAT BOOST
❑
option when water is less that
When selected, the wash cycle will be
extended for 21 minutes while the dishwasher
heats the water for good washing and drying.
STEP 5. Select the wash cycle and start the dishwasher.
(See Cycle Selection Hints).
If your dishwasher drains into a food waste
disposer, operate the disposer until it is empty
before starting the dishwasher.
To obtain the benefits of a complete cycle,
be careful that you do not turn the dial any
farther than necessary to start the dishwasher.
●
For POTSCRUBBER, NORMAL WASH and
LIGHT WASH cycles:
a. Push selected cycle button.
b. Latch the door.
c. Slowly turn the Cycle
Indicator Dial to ON
position to start the
cycle. You will hear
the motor start. There
is a time delay between
the start-up and the water
POT. MOM&l
SCRUBBER WASH WASH
fill so
not hear any wash action right away.
●
For
& HOLD cycle:
a. Be sure door is unlatched.
b. Select ENERGY SAVER
drying option.
c. Slowly turn the Cycle
Indicator
to the
RINSE & HOLD position.
G
\\
.\
I
.
d. Latch the door to start the cycle.
Cycle Selection Hints
It is important to follow the Loading instructions.
●
items such as
pots, pans, cookware, dishes and glasses with
heavy soil. Everyday dishes may be included.
●
NORMAL WASH—For loads of everyday
dishes, glasses
cookware with medium soils.
Designed to yield high performance
normal soils.
●
LIGHT WASH—For dishes with light
soils that have not dried on, or that have extra
preparation before loading. It saves water and energy.
●
RINSE & HOLD—For rinsing partial loads
which will be washed later.
detergent.
6
